Attention to Details

NAPA Echlin Import Fuel Injectors

Designed For Special Delivery

Our fuel injectors are flow-matched to each specific application, with advanced laser-drilled metering holes that deliver precise flow and spray patterns for proper injector performance under all conditions. Manufactured in our TS16949 certified, Greenville, SC facility and 100% tested for coil resistance, injector leakage, static and dynamic flow; it all adds up to the performance you expect from the premium import leader.

  • fj-cad_1png

    High-Temperature Viton®External O-rings enables proper sealing under extreme conditions

  • fj-cad_2png

    Tin-plated brass terminals for increased corrosion resistance

  • fj-cad_3png

    Stainless steel calibration pin and spring assembly prevents corrosion within fuel control body

  • fj-cad_4png

    Solenoid coil windings are precision wound and trimmed to allow application specific resistance values

  • fj-cad_5png

    High-temperature Viton® external O-rings enable proper sealing under extreme conditions

  • fj-cad_6png

    Valve seats machined to a one-micron finish for a leak-proof seal

NAPA Echlin Import EGR Valves

Designed To Go The Distance

At NAPA® Echlin® Import, every part we design features thoughtful details that elevate it above the competition. Our EGR valve sensor contacts are made with a precious metal alloy that withstands millions of duty cycles. Manufactured and 100% factory tested for proper flow, solenoid resistance, response time and leakage in our TS16949 certified, Independence, KS facility; it’s this commitment to excellence that makes us the premium import leader.

  • egr-cad_1png

    Injection molded high temperature polymer to prevent high temperature failure rate

  • egr-cad_2png

    Flexible graphite gasket

  • egr-cad_3png

    Sensor contact made of precious metal alloy to perform millions of duty cycles

  • egr-cad_4png

    Heavy-duty solenoid provides extended service life

  • egr-cad_5png

    All stainless steel internal components resist corrosion

  • egr-cad_6png

    NAPA Echlin EGR Valves are designed as direct-fit OE replacements

  • egr-cad_7png

    Stainless steel internal components and fully encapsulated copper windings and connections on electronic EGR valves ensure precision operation and greater protection

  • egr-cad_8png

    Sintered metal technology ensures a consistent, precise fit of valve seat for accurate flow control

  • egr-cad_9png

    NAPA Echlin Electronic EGR Valves utilize palladium/gold/platinum alloy with a Teflon® based lubricant to ensure very low contact resistance

  • egr-cad_10png

    Improved anti-rust coating on the machine casting for additional protection against rust for maximum life

NAPA Echlin Import Camshaft/Crankshaft Sensors

Designed For Perfect Timing

At NAPA® Echlin® Import we design the details that deliver superior quality and performance. Manufactured in our TS16949 certified, Reynosa, Mexico facility, our Crankshaft Position Sensors feature matching connectors and tin-plated brass terminals to ensure an accurate, watertight connection to the wiring harness. With 100% end of line testing to ensure proper timing, pulse width and signal amplitude, it’s no wonder NAPA® Echlin® Import is the premium import leader.

  • cam-crank-cad-web_1png

    High-strength, Neodymium magnets ensure proper signal voltage to the ECM

  • cam-crank-cad-web_2png

    Factory-Installed Grommets and Wire Clips on the harness ensure proper mounting during installation

  • cam-crank-cad-web_3png

    High-strength, Neodymium magnets ensure proper signal voltage to the ECM

  • cam-crank-cad-web_4png

    Factory-Installed Protective Loom for added protection

  • cam-crank-cad-web_5png

    Factory-installed Grommets and Wire Clips on the harness ensure proper mounting during installation

  • cam-crank-cad-web_6png

    Matching connectors and tin-plated brass terminals ensure accurate, watertight connection to the harness

NAPA Echlin Import Coil-on-Plug Assemblies

Designed to take the heat

Manufactured in NAPA Echlin’s TS16949 certified, Bialystok, Poland facility, our specially formulated epoxy is high temperature shock-resistant to handle rapid changes in engine temperature and prevent cracking or coil damage. Engineered to bond with the coil housing and bobbins, our unique process eliminates air pockets and prevents moisture intrusion and thermal breakdown. It’s just one more design detail that makes us the premium import leader.

  • coil-cad_1png

    Tin-plated brass terminals for corrosion protection and improved electrical contact

  • coil-cad_2png

    Samarium-cobalt magnet in the core creates a strong magnetic field for maximum high voltage output at all speeds

  • coil-cad_3png

    Primary coil winding made of 200°C/392°F insulated premium 25-gauge copper wire - engineered and precision wound to generate a strong magnetic field for improved performance

  • coil-cad_4png

    Improved secondary windings using ETP copper wire provides maximum voltage conductivity

  • coil-cad_5png

    Reinforced bobbins and additional winding bays prevent internal arcing, high voltage breakdown, and voltage flashover

  • coil-cad_6png

    Exact-match electronic module feedback signal

  • coil-cad_7png

    Bobbin is made from polyphenylene oxide glass material to prevent voltage leaking between the primary and secondary coils

  • coil-cad_8png

    Secondary coil windings are precision wound and trimmed to produce desired output voltage

  • coil-cad_9png

    Housing constructed from high dielectric and impact resistant material that ensures long life in operating conditions

  • coil-cad_10png

    Stainless Steel Spring to resist corrosion

  • coil-cad_11png

    High-temp silicone boot stays flexible for easy removal during related component servicing

NAPA Belden EDGE Import Ignition Wire Sets

See the Belden Advantage

NAPA® Belden® Edge Premium Spark Plug Wires come ready for installation straight out of the box. New enhancement upgrades like factory installed wire clips, trays and protective loom keep wires sorted individually for quicker, easier installation, while giving improved performance and protection. Our NAPA® Belden® Edge line is built to save time and money with our EZ-Fit design and “Wired for Life” guarantee.

NAPA® Belden® Edge Premium Spark Plug Wires offer superior heat protection utilizing a specially developed wire casing, that protects against extreme hot and cold, electrical arcing between wires, and gives the wire lower electrical resistance. This lower resistance gives drivers a hotter spark, increased fuel economy, and better starting performance.

Save time and have peace of mind knowing that the easy-to-install NAPA® Belden® Edge line meets and quite often exceeds OE requirements. We design, engineer, manufacture and test every set to ensure you are getting the most advanced, reliable product possible.

  • nb-wire_6png

    Belden’s Formula 46 wire casing offers superior heat protection to stop melting and corrosion before they start

  • nb-wire_1png

    Patented Wire engineered to offer low resistance and high inductance - this means higher voltage and more power that’s transferred faster and with more strength, resulting in improved power, efficiency and performance

  • nb-wire_2png

    Factory installed wire clips and routing trays designed to keep spark plug wires sorted individually and properly spaced to prevent melted casings and electrical arcs, and allows for quick and clean installation

  • nb-wire_3png

    Numbered leads for easy installation

  • nb-wire_4png

    Factory installed protective loom* designed to prevents melted casings and electrical arcs

  • nb-wire_5png

    OE matched spark plug boots and distributor boots provide correct fit, are resistant to fuel and oil contamination and offer a tight moisture proof seal